The useless machine is a simple box with a switch and motor, when you turn on the switch the lid opens and the arm swings out and turns off the machine and then retracts. It is so simple but brings a smile to the face of everyone that tries! The Useless Machine was not created [...]
It’s fairly easy to program a replacement keyless entry remote. Even better, what if you have two vehicles the same make, they use the same remote! Also when the battery goes bad remotes may require to be re paired with the vehicle.
Be sure you have all of your remotes handy, the process will clear [...]
If you get a new keyless entry remote (key fob) or change the battery in your remote you may need to reprogram your vehicle to accept the remote. This procedure works for a lot of 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, and some 2008, and 2009 GM (Chevtolet and GMC) vehicles.
[...]
If you get a new remote or change the battery in your remote you may need to reprogram your vehicle to accept the keyless entry remote or key fob. This procedure works for a lot of 1998-2008 ford vehicles, see below for vehicles that the procedure works on and vehicles that use a slight variation [...]
Building my very first 3D printer was quite traumatic and time consuming but also fun and rewarding! I don’t suggest building your own unless you have a love for tinkering, and making. There are some other qualities that will come in handy such as tendency’s for hacking, electronics, and [...]
In this video I show how to connect a servo to an Arduino and also how to load the sample servo programs included with the Arduino software. The sweep program will drive the arm of the servo back and forth while the Knob program will move the arm of the servo when you turn a [...]
